Fitting a glass splashback

Hayze · 23 Dec 2008

I bought a glass splashback from B&Q which should have fitted into the existing gap between 2 units, over the hob. After a generous amount of sanding I have made it fit - just. What now concerns me is the fitting instructions say to leave a 2mm gap between the glass and any other surface and fill it with silicon. I currently do not currently have this. Is this going to be a problem or should it be ok? The units are B&Q white standard carcasses.

Thanks

confidentincompetent · 23 Dec 2008

Might be it needs an expansion gap? Tileing might be best place to ask.. jason b will put you right ..

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Fitting a glass splashback

Hayze

confidentincompetent

DIYnot Local

Similar threads