Fitting Shower Pump To Combined Bath Taps/Shower Mixer

[WSB]

Hi,
I have a Salamander "CT175+TWIN" (2.1bar)pump currently connected to two bathrooms, each with wall mounted shower mixer.
At the moment I am refitting one of the bathrooms and would like to disconnect the feeds to the shower mixer in one of them and instead feed them into a combined bath tap/shower mixer, so I can get rid of the wall mixer and also have pumped water to the bath.
Seems like a good idea but will this work ok, or could there be associated problems?
Also, must the bath tap/shower mixer be of a particular design?
Thanks

 

[Richardthe3rd]

I'd recommend a thermostatic bath/shower mixer.

 

[WSB]

Thanks Richard.
For what reason though?
As both hot and cold are coming from a 2 bar pump, there should be no variation in pressure on either.

 

[Richardthe3rd]

Thanks Richard.
For what reason though?
As both hot and cold are coming from a 2 bar pump, there should be no variation in pressure on either.

It'll regulate the water flow at the shower & it's safer.