Fixing 9mm MDF edge to edge

[r33nap]

Hi

Help!!!

I need to join mdf edge to edge as I cut MDF 60mm short.

I tried with fixing blocks but no joy.

I was wondering if mending plates would do the job or can someone please recommend a way.

the mdf is only 9mm so I think the biscuit joint would be impossible.

Thanks

 

[big-all]

if it needs to be strong a 100mm strip glued where it wont be seen
or remove half thickness from 12mm and glue together remembering to add 12mm to measurement of the bit you fix on

 

[r33nap]

if it needs to be strong a 100mm strip glued where it wont be seen
or remove half thickness from 12mm and glue together remembering to add 12mm to measurement of the bit you fix on

Thanks, it worked