Flat Buzzer Intercom

[IanGLA]

So I’v had to change my buzzer intercom due to breaking it while moving furniture.

I did have a “GDX 5 (2 Button)” and now I’v bought a “Bell 801”

The Bell came with no instructions so I’m just looking for help to wire it up.

Picture above is of the new Bell setup and wires, the old GDX only used 4 wires in order of White wire with Blue Dots / Blue wire with White Dots / White wire with Orange Dots / Orange wire with White Dots.

Cheers for any help.

 

[Echo the husky]

how was the old one wired?

 

[OwainDIYer]

Stanley GDX5 is only compatible with its own handsets, and they're quite hard to get as they're usually specified for council and housing association systems

https://doorentrydirect.com/gdx-23121-2-button-handset

http://www.intercomsrus.com/handset pdf/GDX Audio Door Intercom Handset Data Sheet.pdf

 

[Taylortwocities]

Google GDX5,I found this, among several others
https://doorentrydirect.com/gdx-23121-2-button-handset

I really hope you noted where the wires went!

PS sorry Owain, see I was too slow..

 

[OwainDIYer]

No worries, people assume that web forums are instant. I'm used to usenet where things only got uploaded twice a day!

Anyway, it's useful confirmation that I was right. I might not have been.