Flomasta magnetic filter 22mm simple replacement

[75pete]

The lid on our Flomasta magnetic filter must have a very small crack as there is now water on the lid. Reading other people experience of this filter also having the same problem. So, I would like to remove it and replace it with a different filter but there is very little room to make any type of change to the existing pipes that feed the filter.
Can anyone recommend a filter that will fit the flow/return connections of my existing pipe work?
Bit of a long shot but would appreciate any advice.
Pete

 

[frankie_tpf]

If you have a photograph of the filter in situ that may be helpful, thanks.

 

[75pete]

It’s the off set one.
Now after more reading, I’m wondering if it might be the internal O ring letting by that acts as the lid seal.