fridge door seal

[Thermo]

just a quickie, and youll probably want more info to answer the question (i need to dig it all out!) i have an under worktop built in standard mfi fridge with a magnetic door seal. The seal needs replacing and ive got the replacement part. Now before i do any damage is there an easy way to change these. the old one appears to be glued on, but im not 100% sure, the new one seems to have a continuos strip on it which looks like it may tuck in under part of the door.

hope that makes sense!

cheers for any help.

 

[Diyisfun]

They usualy hook or sit under the door liner. (Not heard if glue b4).
Try undoing a few screws from the door liner.
The BEST way to replace a seal is to remove the door & lay it FLAT, if you dont you may find the door will twist.

 

[Sleepyhead]

Some machines have the seal bonded to the door before the liner is bonded to the assembly. If this is the case with your appliance you actually need a new door. (No idea why they supply the seal seperately).

 

[Thermo]

Cheers, went back to the supplier and they made a bit of a booby, so a new door is on its way. They advised me thats its complex to fit a new door and a technician should do it. i pointed out that i fitted it in the first place, and it was nowhere near as complex as trying to fit the wrongly supplied part to the door.