Galaxy Dimension 520

Joined
8 Apr 2021
Messages
1
Reaction score
0
Country
Portugal
Hi guys
Let's see if someone can help me.

I have a GD520, i have some zones set as 24h Function ( doors ), assined to diferent groups, those zones are already connected to existent RIO's EX: 3012.
Now in some doors we installed DCM's, ( for entrace control propose only, not to lock doors ) card reader entry , REX to exit. Again EX: DCM301- DCM Reader 3011.
On DCM i have only connected the reader and the REX button, the magnetic contact is connected to zone 3012
Problem: When acessing the door by pushing the panic bar, zone 3012 sets an allarm on group, this is working ok.
Now, when i press the REX button or use the card reader, the zone should be omited, and this is not happening, is setting an alarm as well.
Any ideias on how shoul the Links be programed? - I have programed a Link
FROM DCM READER 3011 - TO ZONE 3012
Without sucess.Not sure this is the right way.
Can I use connect the magnetic contact on zone 3012, or must i connected it to the DCM?

Thanks for all help you can give me.
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top