- Joined
- 29 Oct 2020
- Messages
- 5
- Reaction score
- 0
- Country
I have a dethatched garage which currently has a small 2-way CU - 100amp Main Switch, B6 for lights and B16 for sockets.
(Pic attached).
We are doing a basic conversion on the garage into office space. Meaning I'll add probably 1 additional 2-gang socket.
We will be running some office equipment plus 1 or 2 electric heaters from the space, nothing to meaty.
Lighting-wise we wont be adding to the load so sure the B6 will be fine.
Sockets-wise I'm concerned we may overload it a bit.
Since we have a 100A Mains Switch, should the B16 be able to be switched out for a B32?
Any advice appreciated.
Thanks,
(Pic attached).
We are doing a basic conversion on the garage into office space. Meaning I'll add probably 1 additional 2-gang socket.
We will be running some office equipment plus 1 or 2 electric heaters from the space, nothing to meaty.
Lighting-wise we wont be adding to the load so sure the B6 will be fine.
Sockets-wise I'm concerned we may overload it a bit.
Since we have a 100A Mains Switch, should the B16 be able to be switched out for a B32?
Any advice appreciated.
Thanks,