I had a Gardtec 370 system installed in my house some 9 yrs ago. I've never had a problem with it. However, today we've had a power cut, the alarm activated, and there was no way of switching the damn thing off. The RKP showed 'PC', but wouldn't respond to the code with I normally input. I'm sure that I've had power cuts before, but I've never had this problem.
Any suggestions, (bearing in mind I'm very much at 'user' level and not 'installer' level)
thx
John
Any suggestions, (bearing in mind I'm very much at 'user' level and not 'installer' level)
thx
John