Glow-worm 30CXI over pressure

Joined
6 Jan 2010
Messages
2
Reaction score
0
Location
Herefordshire
Country
United Kingdom
Hi All
I am hoping someone can help me out.
Ive increased the pressure too much on my glowworm 30CXI boiler.
Its running at 3.1 bar even on standby (flashing on the display) and should be 1.0 Bar during normal operation.
Does anyone know how I can reduce this pressure?
Any help would be much appreciated!

many thanks
Barry
 
Sponsored Links
It worked, thanks so much.
Would have also fixed that lukewarm radiator i drained I guess!

Thanks again

Barry
 
Another way to reduce the pressure is to take off the front cover of the boiler, two screws at the bottom and lift off, is to use the Pressure Release Valve (PRV) it is a red handled valve on LHS, press down briefly and watch the pressure drop on the display.
 
Sponsored Links
:rolleyes:
don't use prv to drain system , probably cause more problems. just do it as burnerman said.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top