I have a problem with my Gloworm Swiftflow Combi boiler. When I use the H.W or C.H the pilot light goes out after approx 1 min. Boiler has been fine for last 2 years, and was last serviced nov 05.
Any ideas of the want the problem could be ?
Gloworm Swiftflow Honeywell
- Thread starter jester
- Start date
I have a problem with my Gloworm Swiftflow Combi boiler. When I use the H.W or C.H the pilot light goes out after approx 1 min. Boiler has been fine for last 2 years, and was last serviced nov 05.
Any ideas of the want the problem could be ?
Sponsored Links
could be many reasons,o heating,poor pilot,blocked heat exchanger .slow fan ,reqs looking at by "expert"
odds on its the fan.
Sponsored Links
On these boilers fan runs constant to provide air for the pilot to burn some have air pressure switch, some do not normally it is the thermo couple or/and the o/heat stat weak.Although had one last week the meter gov. was gone it was ok to light pilot but soon as burner lit w/p at meter dropped knocking pilot out. But really is corgi territory
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
