Good quality security T25 torque needed

[muckington]

Went to the Tool Station on Saturday to buy a security torque set. Got them back home and Andy said they where ****! they will just brake. Took them back and went to Machine Mart. Again **** tools! (and they employ stupid little pieces of **** in these shop, and the guy who runs it, is a crook as well)

Any ideas where I can get a T25 to fit my drill please? BTW there are the special security ones with the bit in the middle

Thanks

 

[opps]

Over the years, I have purchased sets of long security Torx bits from Amazon. On average about £7.

To be honest, I normally only use them to remove security screws from plastic cases for power tools.

If you want quality ones, look at the likes of Wera

Wera 056158 Security Torx Bit-Check Sets | Shop4Fasteners | Shop4Fasteners

Wera 056158 Security Torx Bit-Check Sets with Quick-Change Bit Holder, TX10. UK stock, fast delivery.

shop4fasteners.co.uk

But a set of small bits will cost about £25.

The above company sells an individual short bit though

Wera 066515 Professional Security Torx | Shop4Fasteners | Shop4Fasteners

Wera 066515 Professional Security Torx Screwdriver Insert Bit - TX25 x 25mm, 25mm. UK stock, fast delivery.

shop4fasteners.co.uk

Edit- I guess you are not using an impact driver.

 

[freddiemercurystwin]

Yes Wera is a pretty good make.

 

[stevie888]

Doesn't Andy have advice on what's good?