I rushed a bathroom project and didn't properly clean all the excess adhesive off properly during a tiling excerise. I thought the grout would cover this up well enough. instead, on certain areas, the adhesive shows through badly. Is the answer as tedious as scraping out and starting again? if so - Is there a special tool to use.
grey/brown adhesive showing amongst nice white grout !
- Thread starter winker watson
- Start date
Sponsored Links
M
Moz
YES ..an dont dont be SO lazy in future , 
Carefully use a chisel to remove the high brown bits then re-grout those areas.
Sponsored Links
M
Moz
FFS ....Dont do patches , get it all scraped out an do it properly ,
use one of these Grout Rake
http://www.tradetiler.com/acatalog/tradetiler_tile_cutter_grouting.html
use one of these Grout Rake
http://www.tradetiler.com/acatalog/tradetiler_tile_cutter_grouting.html
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
