- Joined
- 20 Sep 2013
- Messages
- 1
- Reaction score
- 0
- Country
if anyone can help or give me some ideas i'd appreciate it, i have a halstead finest platinum.
it does not fire properly, it fires up when it wants, when demand is for hw and when it can be bothered with ch, have to constantly press reset button 5 or 6 times to get hw or ch, i have pressed diagnostic mode it says dhw flowswitch is faulty, the little red light on this seems to flash and be working ok, however i have noticed that the ch microswitch has a pin underneath it that does not seem to move. any ideas would be greatly appreciated!
it does not fire properly, it fires up when it wants, when demand is for hw and when it can be bothered with ch, have to constantly press reset button 5 or 6 times to get hw or ch, i have pressed diagnostic mode it says dhw flowswitch is faulty, the little red light on this seems to flash and be working ok, however i have noticed that the ch microswitch has a pin underneath it that does not seem to move. any ideas would be greatly appreciated!
