• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

Has anyone used these outside path lights, and how best to secure cable to stonework?

Joined
2 Dec 2013
Messages
4,901
Reaction score
807
Country
United Kingdom
Has anyone used these outside lights from TLC:

https://www.tlc-direct.co.uk/Products/GL29192AT.html

image.jpeg


It's a "BREEZ - Surface Mount LED Brick/Guide Light - Anthracite" by Forum Lighting.

Any comments about quality etc. would be appreciated.

The plan is to fit a few of them at a relatively low level in the sunken access to my back door:

IMG_1007 Medium.jpeg


I will wire them up with NYY-J cable, running at ground level and then up to each lamp. My concern is that it could be difficult to do this neatly as the stonework is rather wonky. Mounting the lights so they are flat could also be a challenge. Any advice? In particular, what sort of cable clip / cleat would you suggest?

Thanks.
 
I will wire them up with NYY-J cable, running at ground level and then up to each lamp. My concern is that it could be difficult to do this neatly as the stonework is rather wonky. Mounting the lights so they are flat could also be a challenge. Any advice? In particular, what sort of cable clip / cleat would you suggest?

Have you considered using solar powered, PIR triggered, LED units?

I recently installed six of these, to give some supplementary light on my very dark drive, and these have proven to be extremely effective. https://www.ebay.co.uk/itm/406142454419

I had little faith in on from dark, solar LED, because in winter, they do not get enough charge to be useful - but as these are PIR, they seem to not need nearly as much daylight, to keep them topped up.
 
Have you considered using solar powered, PIR triggered, LED units?

The amount of sunlight that this area gets for charging is absolutely minimal, and I would need them to function right through the night.

I had little faith in on from dark, solar LED, because in winter, they do not get enough charge to be useful - but as these are PIR, they seem to not need nearly as much daylight, to keep them topped up.

Interesting.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top