The edges of vinyl wrapped mdf kitchen cupboards were too close to cooker and the vinyl on one edge of the door has lifted up exposing MDF beneath
The doors look Ok from the front so I want to stick the vinyl back to the mdf as much as possible, possibly cut a little of it off if it canot be restuck, sand and paint.
What glue is best. Any more tips how you would proceed?
The doors look Ok from the front so I want to stick the vinyl back to the mdf as much as possible, possibly cut a little of it off if it canot be restuck, sand and paint.
What glue is best. Any more tips how you would proceed?
