Heatelectric

DP

Joined
10 Dec 2003
Messages
19,806
Reaction score
6,165
Location
Glasgow
Country
United Kingdom
Any of you fine fellas have knowledge of this brand
image.jpg
image.jpg
image.jpg


I am a heating engineer majority of my work is repairs and service.

Thank you.
 
I used to, but I have forgotten it all now.

A variety of off-peak storeage heating.

Was it the one with a block of concrete in the middle of the house, as a store of heat that could later be distributed around the house as required?

ISTR there was a specialist engineering Co making spares for it, last time I looked.

Are you in the old Hydro area?
 
  • Thanks
Reactions: DP
I used to, but I have forgotten it all now.

A variety of off-peak storeage heating.

Was it the one with a block of concrete in the middle of the house, as a store of heat that could later be distributed around the house as required?

ISTR there was a specialist engineering Co making spares for it, last time I looked.

Are you in the old Hydro area?
This ‘radiator’ has a small pump and electronics with a receiver and circuitry to control the immersion heater. Heated water circulates in the unit

The pcb has an overheat stat but thd massive problem is unit needs stripping down to insert a straight paper clip through a hole in the guts of the control box only when control box is removed from guts of the radiator. BTW, heated water circulates in the radiator to heat it
 
Other than familiarity, what is the question?
I changed the pcb from a recovered radiator to get the radiator working. Worked for a year. Now the led shows green or red depending on control knob position like rest of the radiators but no heat.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top