Hi All,
Would appreciate any feedback on my layout. It took some months for me to get this down on paper.
Its part of my renovation of the entire house.
I have no experience with stoves but have spoken to a few people and read alot about the requirements.
I have purchased a good used 6kW GSHP. Heat losses for the house are around 5kW peak.
I hope to extend the house in a few years, so ground loop and DHW tank are sized to allow for an 8kW GSHP and 2 bath's 1 Shower.
My only question at this stage is if the cylinder thermostats can be "smart" with 2 set points / channels. Or just use 2 stats per cylinder, as i need different set points, per that attached.
Hope it makes sense....
Thanks
Would appreciate any feedback on my layout. It took some months for me to get this down on paper.
Its part of my renovation of the entire house.
I have no experience with stoves but have spoken to a few people and read alot about the requirements.
I have purchased a good used 6kW GSHP. Heat losses for the house are around 5kW peak.
I hope to extend the house in a few years, so ground loop and DHW tank are sized to allow for an 8kW GSHP and 2 bath's 1 Shower.
My only question at this stage is if the cylinder thermostats can be "smart" with 2 set points / channels. Or just use 2 stats per cylinder, as i need different set points, per that attached.
Hope it makes sense....
Thanks