Heating system help

Joined
18 Feb 2006
Messages
1,612
Reaction score
19
Location
Birmingham
Country
United Kingdom
Hi all

Need a few heating system for the house to replace the old boiler.

In total there will be 16 radiators of various sizes, 1 wetroom shower and another shower that will be electric.

Is it possible to run this of a combi boiler like a worcester bosch 42cdi, and will there be enogh power to the shower?

Also what could be the alternative?

Thanks
 
Sponsored Links
That would be fine if thats what you have got.

However, the performance will depend on the mains water incoming.

You will need a dynamic flow rate of at least 24 li/min if you are going to get full performance from both showers at the same time.

Tony
 
also as the ground floor is concrete, what would be the best way to run pipes so you can see them?
 
Sponsored Links
The 937 will give 20l/min with a suitable incoming mains pressure and flow rate.

Unless you want the expense and/or bother of cutting up your floors then surface mounting the pipes will be the easiest answer.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top