heatline vizo three way valve

Joined
24 Jan 2017
Messages
3
Reaction score
0
Country
United Kingdom
hi there
looking for a little help please

i have a heatline vizo boiler that started to go wrong a short while ago and a plumber came out to look at it and told me that the diverter valve was leaking and had blown the three way valve motor, he replaced the motor unit and then cut the cable powering it and connected a new one,

i still have the same problem that it is blowing fuses, i suspect that he has wired the plug that goes into the motor wrong

does any one have the connections on the motor unit, they are labeled 1,2,3 but i need to know which one is neutral and which one is poss for heating and poss for water

hope to hear soon

thank you
 
Sponsored Links
hi there,
yes he fixed the leak, but he only had a cut one in his van so had to fit the one he had, he was a bit of a pain in the ass and didn't seem to know what he was doing but i needed something doing

do you know where i can get the wiring diagram so i can see where 1 2 and 3 wire back to
 
Sponsored Links
Back
Top