-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
help no ch/hw
- Thread starter pkay
- Start date
is the diverter valve working do you get a bit of hw then cold ?
If itisn't firing for HW but your CH is working, the flow switch isn't doing it's thing. If you drop the front panel(s) so you can see in to the pcb, there's a red light which should come on when HW is drawn.
If not, then down to the left there's a brass thing aabout 80mm diameter with a hexagonal shaft about 30mm long going to the right. On the end of the shaft there's a microswitch. Something could be stuck, seized, had water leak into it, etc.
If not, then down to the left there's a brass thing aabout 80mm diameter with a hexagonal shaft about 30mm long going to the right. On the end of the shaft there's a microswitch. Something could be stuck, seized, had water leak into it, etc.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
