Help re Cooker Hood
- Thread starter schroedm
- Start date
Sponsored Links
Probably, as I said in the previous post. I have always suspected that a wall or ceiling mounted normal extractor fan with the correct extraction rate would work just as well as a cooker hood but look a bit unsightly.
No, but it reduces facial bruising.
I like the hood to be wider than the hob.
You can also get a canopy extractor that is fitted into a high level bridge unit to match your wall units. Some are very good. The extractor duct hole in the wall has to be quite high to go above.
I find this brand good.
I like the hood to be wider than the hob.
You can also get a canopy extractor that is fitted into a high level bridge unit to match your wall units. Some are very good. The extractor duct hole in the wall has to be quite high to go above.
I find this brand good.
Another consideration that might affect the positioning of the hob is the type of splash back you choose. Ours is a ready made stainless steel one that rests at the back of the hob with the cooker hood covering the top fixings. It is 750mm high so that is the distance from the hob to the extractor and has never been a problem.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
