Help With Car

[dagodfather]

I have my 4 rear bushes for my saxo, does anyone know how to take the old ones and put them on. I know its a difficult job, but im capable of doing it if i knew the exact method. All suggestions will be great

Many thanks, Ben.

 

[jonnyfishing]

Ben,

With all due respect,the best advice I could give you is to acquire a Haynes Manual you will get step by step and probably pics and tips on how to do it.

 

[^neo^]

And it's a pig of a job too !

 

[KingboyD]

And it's a pig of a job too !

It is even with the correct tool to get the old bearings out

 

[scanjet21]

wash grease off lay flat get small chissal or scewdriver small hammer insert in on to bush gently tap bush move around in circle untill it fall out wipe clean grease new bush high tensael grease tap back in new gently with flat edge of small 1/2 inch bar or near tool do the smame again best to take both out first to avoid damage to new ok