- Joined
- 2 Oct 2021
- Messages
- 1
- Reaction score
- 0
- Country
Hello. Can I ask advice on the correct settings for my Glow Worm Ultracom 30 CXI please.
I moved into this house in June this year and now the cooler weather is approaching I found the CH is not working as it should.
The boiler is in the loft and there is a Drayton Digistat +3 in the hallway. When I had a look at the boiler control panel it had been left in hot water only mode. The question I am asking is what mode should it be in for the Drayton roomstat to be in command of calling for the heating to operate? The modes are..
Off
C/H and hot water on timer. (I take that to mean the boilers built in timer)
C/H and hot water on continuously.
Hot water only.
The heating works fine on the continuously mode so that leads me to think this is only a set up issue.
I moved into this house in June this year and now the cooler weather is approaching I found the CH is not working as it should.
The boiler is in the loft and there is a Drayton Digistat +3 in the hallway. When I had a look at the boiler control panel it had been left in hot water only mode. The question I am asking is what mode should it be in for the Drayton roomstat to be in command of calling for the heating to operate? The modes are..
Off
C/H and hot water on timer. (I take that to mean the boilers built in timer)
C/H and hot water on continuously.
Hot water only.
The heating works fine on the continuously mode so that leads me to think this is only a set up issue.
