Hive Active Thermostat - Baxi 105e

[doberman27]

Hi all,

I have just wired the receiver under the boiler and it seems that I can't actually control the boiler when I press the heating button on it.
I have the internal clock installed and the boiler/clock is set to always on. I am trying to find the correct wiring diagram but it seems that I am doing something wrong.

1. I have connected the L,N from the boiler onto the receiver, so we have power no problem.
2. I removed the link between 1-2 on the boiler side that closes the loop (I suppose Hive will do that from now on)
3. Receiver now has Common, Heating On, Heating Off waiting to be connected.

Can you possibly help me so I can have the heating up and running? I ad to reinstall the loop on the boiler side between 1-2 so I can turn the heating on the way it used to be.

Thanks in advance

 

[muggles]

You've very nearly answered your own question there. Remove the link, wire one terminal to Common and the other to Heating On. Heating off isn't used

 

[picasso]

1 to common on reciever
2 to heating on.

 

[doberman27]

Thanks for your replies. It obviously worked!
Much appreciated!