I've got the hot water working but not the heating it goes solid green but doesn't start heating. I've set it to 32C so it should be starting up.
I've located the wires from the thermostat (using a multimeter) after removing red and yellow from the thermostat from the main box.
I've connected white 12 (y plan) to red 1 (from the boiler controller) is this correct? What do I do with the blue (neutral - in the rising connector) as removing the thermostat leaves the boiler neutral on its own.
Many thanks
I've located the wires from the thermostat (using a multimeter) after removing red and yellow from the thermostat from the main box.
I've connected white 12 (y plan) to red 1 (from the boiler controller) is this correct? What do I do with the blue (neutral - in the rising connector) as removing the thermostat leaves the boiler neutral on its own.
Many thanks