I have two valves Honeywell F6 9813 in the system, both fitted about 17 years ago.
One is not working and so measured resistance across blue and brown to discover one is 2.4KOhm, the other is open circuit.
The open circuit one is not working - so assume motor is broke
QUESTION - Even though this unit is ancient can I just replace the motor, or will I need to have the whole valve replaced.
I could not find answer by looking at Honeywell site.
One is not working and so measured resistance across blue and brown to discover one is 2.4KOhm, the other is open circuit.
The open circuit one is not working - so assume motor is broke
QUESTION - Even though this unit is ancient can I just replace the motor, or will I need to have the whole valve replaced.
I could not find answer by looking at Honeywell site.