- Joined
- 5 Nov 2019
- Messages
- 46
- Reaction score
- 1
- Country
Evening all
Merry Christmas all, our heating system isn't quite so festive and has decided to let us down today.
It has a wireless honeywell stat paired with a Honeywell HC60NG receiver. When you adjust the thermostat the receiver relay clicks and goes green as it should. However after 1second or so it clicks again and quickly flashes red then off.
Even if you manually press the button the same thing happens the relay clicks open then straight back off.
Tried re-pairing, turning the power off and on, checks all the wires for any loose connections but no lick.
Any advise appreciated!
Rob
Merry Christmas all, our heating system isn't quite so festive and has decided to let us down today.
It has a wireless honeywell stat paired with a Honeywell HC60NG receiver. When you adjust the thermostat the receiver relay clicks and goes green as it should. However after 1second or so it clicks again and quickly flashes red then off.
Even if you manually press the button the same thing happens the relay clicks open then straight back off.
Tried re-pairing, turning the power off and on, checks all the wires for any loose connections but no lick.
Any advise appreciated!
Rob