HONEYWELL T6360B

[APRILLIA125KID]

I NEED TO NOW WHICH COLOUR WIRE GOES WHERE ON HONEYWELL T6360B THERMOSTAT
I HAVE RED/BLUE/YELLOW & EARTH BUT DON'T NOW WHICH TERMINALS THEY GO IN TO

 

[kevplumb]

depends how the old one was wired

 

[APRILLIA125KID]

depends how the old one was wired

I DON'T KNOW HOW IT WAS WIRED BECAUSE THE DECORATORS TOOK IT OFF

 

[seco services]

tell the muppet to put it back then or he pay someone to.

 

[doitall]

Try Red -1

Yellow - 3.

Blue - 2

 

[kevplumb]

Blue - 2

bits

 

[doitall]

Blue - 2

bits

2 is neutral and 3 is load.

He has a yellow and a blue, so yellow will be the load, and blue will be the neutral.

 

[kevplumb]

hope the bugger that fitted it thought that way

wouldnt be the first time ive seen earth used as sl

 

[Boilerman2]

It's got worse now we have Brown Black & Grey!!!
iv'e been to commission loads of systems that blow a fuse because the sparks has forgotten how he connected the "other end"

 

[doitall]

Sparkies shouldn't be allowed near boiler wiring.

 

[twgas]

and it might have motor on motor off valves, then what?

 

[doitall]

and it might have motor on motor off valves, then what?

Put the yellow in 4

 

[Lazzer]

Had similar problem,
I've put
red to 1
Blue to -2
Yellow green to 3
And light stays on!! Even when turned down to 10?


Should I try yellow green to 4

 

[doitall]

Try the blue to 3 and not connecting the yellow/green

Bit more info would be handy, like make/model

 

[Lazzer]

Thx
Tried that, Honeywell T6360B, I think it a switch circuit should I try and swap the blue and red terminals to see which is live