hot water problem with excell 80E vokera

Joined
27 Dec 2013
Messages
2
Reaction score
0
Location
Aberdeen
Country
United Kingdom
Hello,
with the switch on hot water only, I am getting no hot water when the taps are ON the gas burner does not come ON and only cold water flows through. when the switch is on central heating mode radiators gets warm . but still no hot water through the taps.
no red lights are illuminated..on the panel
I am clueless as to what the issue is.. the festive period doesn't help either any advise is appreciated..

the boiler is more then 10 yrs old..

thanks

pram
 
Sounds like you need to call out a gas engineer.
These boilers are quite robust though. Sounds like either a divert valve diaphragm or microswitch fault.
Both relatively easy to do.
 
You need to replace the Domestic Hot water Diaphragm, a mid range job for a competent Diyr but wouldnt be too expensive to get a registered engineer in to do
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top