Hotpoint dishwasher DWF50 lights 4/6

[lambrett]

Hi all, my Hotpoint dishwasher DWF50 lights 4/6 have been flashing, now the code for that is the heating element has blown so i changed it with a new one and when i switched it back on the same happened again Is there another element any where.

 

[rocks1]

No other element. Pcb has gone. Also check the connector hasn't burnt out on the pcb. It's the pink wire.

 

[lambrett]

No other element. Pcb has gone. Also check the connector hasn't burnt out on the pcb. It's the pink wire.

Hi thanks for the reply can you tell me where about the pcb is and is there anyway of testing it.

 

[rocks1]

It's behind the front console panel. No way of testing the pcb.

 

[lambrett]

It's behind the front console panel. No way of testing the pcb.

Hi i had a look and the only pink wire i could see is the one connected to the door latch

 

[rocks1]

It's also on the pcb top left corner