Hi all,
Water leaking from bottom of door at each side.
This machine is 9 years old but in otherwise perfect order, so seems worth saving. I've checked the seals & they seem in very good condition & clean. It's filling, cleaning & emptying OK. I've run it through with cleaner twice. I've taken the sides off and removed various pipes to check they are clean. There are no apparent blockages in the spray arms. I'm in a soft water area & no signs of limescale anywhere.
The machine seems to be slightly overfilling. Consequently there is too much water slooshing about in the bottom of the machine and this is sometimes spilling over the lip at the front under the door. Particularly when the spraying first starts up.
I read in this forum that the fill level is controlled by some kind of float switch, and that this can sometimes be affected by gunge/limescale. Can anyone tell me where the float switch is on this model and what it looks like? I don't want to start pulling apart too many bits without a clue
Can't see anything in the owners manual & I couldn't find a manual online
Cheers
Don
Water leaking from bottom of door at each side.
This machine is 9 years old but in otherwise perfect order, so seems worth saving. I've checked the seals & they seem in very good condition & clean. It's filling, cleaning & emptying OK. I've run it through with cleaner twice. I've taken the sides off and removed various pipes to check they are clean. There are no apparent blockages in the spray arms. I'm in a soft water area & no signs of limescale anywhere.
The machine seems to be slightly overfilling. Consequently there is too much water slooshing about in the bottom of the machine and this is sometimes spilling over the lip at the front under the door. Particularly when the spraying first starts up.
I read in this forum that the fill level is controlled by some kind of float switch, and that this can sometimes be affected by gunge/limescale. Can anyone tell me where the float switch is on this model and what it looks like? I don't want to start pulling apart too many bits without a clue
Can't see anything in the owners manual & I couldn't find a manual online
Cheers
Don