Hotpoint hob...

[tilly10]

I need help with the wiring on my cra 641 dc hob

I had to remove the hob but had to undo the wire directly from the hob and am now unsure what terminals the brown and black wires go to.

Anyone help please?

 

[Diyisfun]

Brown = Live
Black = neutral

 

[tilly10]

The black is also a live as the hob can be wired into three phase. The live side of the terminal block has 3 connectors numbered 1,2,3.

 

[Diyisfun]

shouldnt the phases NOW be linked..if its UK

 

[tilly10]

sorry but i don't really understand electricity. in the manual there is a clear picture of the three phase wiring showing which terminals the wires go in. The 240 volt just shows the cable and what they are but not where they go.
on the live side of the block terminal 1 is alone whilst terminal 2 and 3 are linked with a "U" clip.

 

[tilly10]

This is a link for the manual so you can see what I mean.

http://www.hotpoint.co.uk/hotpoint/...f;jsessionid=333A3BA02B4AFB8DEA895BBDED061E7A

 

[tilly10]

Can anyone help, please...

 

[Diyisfun]

Your link does not work.
On the hob...The terminals that have the 'u' link are live.
The single terminal is the neutral.

 

[tilly10]

All sorted and works as it should... black live... T1, brown live...T3