hotpoint wm53 stopping mid cycle

[roace5]

hello all
my washing machine has been working fine but has stopped mid cycle and keeps repeating i have narrowed it down to pressure switch and have checked the pipe and that is clear ! it has a four pin connetors on and have tested them then while blowing in and two work while the other doesnt ! is all 3 meant to work on ohms test ?
any help would be good thanks

 

[rocks1]

I don't inderstand what your saying. Does it fill does it wash does rinse water go in does it empty and spin. I would check motor brushes first.

 

[roace5]

sorry ! it fills up then just stops motor buushes are fine !
thnaks

 

[rocks1]

so the drum dont move ,

 

[roace5]

it doesnt spin ! can move it by hand !

 

[rocks1]

Is there a glass fuse on the pcb. Also check continuity from the motor plug to pcb. It's about 6 wires.

 

[roace5]

terminals seem fine ! cant see a glass fuse !

 

[rocks1]

Test them for breaks with a tester.

 

[roace5]

sorry did test them and they were fine !

 

[rocks1]

If there is no burn marks on the pcb then motor has had it

 

[roace5]

how do i test to see if its the motor ? dont want to buy without knowing for sure ! thanks again