Hi
I returned home to be told the washer had stopped mid cycle and all the lights where flashing
Did the usual dragged it out cleaned out the sump hose chamber checking the pressure switch chamber was also clear and pipe unrestricted
I Reassembled it and switched back on
I tried the rinse and spin option and the lights for the wash cycle came on ,the machine then locked the door and started to fill
It then reached a normal level and just stopped , this lead me to believe the pressure switch was working to a degree
at this point I believe the motor should have started(on older models with a cam timer the impulse would have moved it round and the motor should have been started )
Would I be right to assume either the control board is not operating it or the motor unit is faulty (after a few mins in this state the wash light goes from steady state to flashing )
(Can anyone explain where I can get the light fault codes for this machine)
my gut feel is it has more to do with the control board as the light sequences dont seem to tie up with the programme settings and if you also go to the exclaimation mark to stop a programme nothing happens when you press the button
Please reply if anyone has had a similar fault and guide where to look at next
I returned home to be told the washer had stopped mid cycle and all the lights where flashing
Did the usual dragged it out cleaned out the sump hose chamber checking the pressure switch chamber was also clear and pipe unrestricted
I Reassembled it and switched back on
I tried the rinse and spin option and the lights for the wash cycle came on ,the machine then locked the door and started to fill
It then reached a normal level and just stopped , this lead me to believe the pressure switch was working to a degree
at this point I believe the motor should have started(on older models with a cam timer the impulse would have moved it round and the motor should have been started )
Would I be right to assume either the control board is not operating it or the motor unit is faulty (after a few mins in this state the wash light goes from steady state to flashing )
(Can anyone explain where I can get the light fault codes for this machine)
my gut feel is it has more to do with the control board as the light sequences dont seem to tie up with the programme settings and if you also go to the exclaimation mark to stop a programme nothing happens when you press the button
Please reply if anyone has had a similar fault and guide where to look at next