https://www.tradingdepot.co.uk/homeboost-1-6-bar-mains-water-pump
I thought you cannot fit a pump on the incoming mains?
I thought you cannot fit a pump on the incoming mains?
How is this allowed? Mains water boosting
- Thread starter Oddbod1
- Start date
The rules are up to 1.5bar or 12 litres a minute.
They've just put the title down wrongly.
They've just put the title down wrongly.
London is frequently awful. 2nd and higher floor flats often need an accumulator or break tank & pump. Either of which can be less hassle than replumbing in larger pipe which can make little difference.
Better to say "open pipe flow rate" as that is what is usually used in the industry.
It will depend on street pressure and the flow resistance in the pipe from street to house.
Usually up to about 30 li/min but can exceptionally be a lot higher. The water meter is usually only 22 mm and can be quite restrictive to the flow.
25 mm plastic has a smooth interior and less fittings and will typically give a better flow rate.
32 mm plastic is better still and hardly any more expensive when the supply is installed. That will usually give 30-50 li/min.
Tony
It will depend on street pressure and the flow resistance in the pipe from street to house.
Usually up to about 30 li/min but can exceptionally be a lot higher. The water meter is usually only 22 mm and can be quite restrictive to the flow.
25 mm plastic has a smooth interior and less fittings and will typically give a better flow rate.
32 mm plastic is better still and hardly any more expensive when the supply is installed. That will usually give 30-50 li/min.
Tony
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
