I have successfully fitted a replacement dormer window
I have also clad the sides to match the window
But am having a problem trying to sort out the trim from the window over the wooden frame to meet the side cladding
I have used hollow sofit boards and edge trim to clad the sides now on the front I have the plastic window and timber frame to plastic over the problem being the bottom of the dormer on the sides with the cladding fans out so it is not straight the gap at the top is around 80mm but fans out at the bottom to about 120mm so a straight piece of plastic trim will look stupid
The dormer itself was constructed that way for whatever reason so it leaves me with a problem of trimming the front to catch the sides and make it water right
Any ideas?
If I can get onto the lappy I will sketch I diagram to illustrate what I mean better
Thanks
I have also clad the sides to match the window
But am having a problem trying to sort out the trim from the window over the wooden frame to meet the side cladding
I have used hollow sofit boards and edge trim to clad the sides now on the front I have the plastic window and timber frame to plastic over the problem being the bottom of the dormer on the sides with the cladding fans out so it is not straight the gap at the top is around 80mm but fans out at the bottom to about 120mm so a straight piece of plastic trim will look stupid
The dormer itself was constructed that way for whatever reason so it leaves me with a problem of trimming the front to catch the sides and make it water right
Any ideas?
If I can get onto the lappy I will sketch I diagram to illustrate what I mean better
Thanks