How To Plaster Over An Artex Ceiling?

Joined
15 Dec 2008
Messages
581
Reaction score
9
Location
London
Country
United Kingdom
I need to hire a plasterer to plaster over my artex ceiling above my stairs and landing area to give a smooth finish

I've been offered the services of a mates brother but would rather avoid simply because it would be uncomfortable if I was not satisfied with the job so I've done a search through the yellow pages for my local area.

I'm going to ask for references but I'd also like some info on how the job should be done so I can get a feel for whether they know what they're doing.

Can anyone tell my how the job should be done for a good quality, durable finish and what to look out for.

Cheers!
 
I think Richard C posted a detailed one on this not so long ago, but I can't find it. Anyone?
 
i know richard prefers to get the artex off with a steamer first if he can but if not he'll skim straight over it.

if the pattern is deep then i guess a tight coat of bonding first before skimming lads?
 
i know richard prefers to get the artex off with a steamer first if he can but if not he'll skim straight over it.

if the pattern is deep then i guess a tight coat of bonding first before skimming lads?
It's not particularly deep. Around 2 mm with a few high spots at 5mm
 
A coat of green gritty stuff...Thistle Bond-it . will I think, do a better job than PVA. then skim over that. Stairs+ landing could be awkward and need temporary scaffold. Would cost c. £200 down here in sticks ( cash) :wink: London , it could be anything :? Would be interested in outcome £.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top