I'm planning to build a wooden lead-to greenhouse and have been looking at the types of wood available.
The timber I'm considering is "Sawn, Treated, Kiln Dried C16" but since it's sawn that is currently too rough to apply stain or paint.
I know that I can smooth out the surface of the timber for painting by either planing or using an electric sander. Which would you recommend?
Thanks for your advice,
Robin
The timber I'm considering is "Sawn, Treated, Kiln Dried C16" but since it's sawn that is currently too rough to apply stain or paint.
I know that I can smooth out the surface of the timber for painting by either planing or using an electric sander. Which would you recommend?
Thanks for your advice,
Robin