hi I have old upvc window that were replacement units after the sash units were replaced and these were finished inside by plywood returns and facings.
Now where the plywood meets the upvc this was siliconed and glossed over, now the paint is flaking off the silicone and I want to repaint, so silicone scraped out and wood cleaned up I'm left with a couple of mm gap I was thinking decorators caulk then gloss over, what would you recommend
Now where the plywood meets the upvc this was siliconed and glossed over, now the paint is flaking off the silicone and I want to repaint, so silicone scraped out and wood cleaned up I'm left with a couple of mm gap I was thinking decorators caulk then gloss over, what would you recommend
Last edited: