How to treat & paint garage floor?

[GKH]

Hi
I have had a lot of trouble getting a garage floor in. It is concrete with a screed on top. I keep reading conflicting opinions on the next step. I've been told to put SBR on neat with a roller. Then to paint on top of this. Is this correct? (but have read not to use SBR but just paint, or use pva & water and then paint, and read that these options can lead to paint lifting with car tyres...) The garage will be used sometimes for cars and sometimes as a room.
What is best?
Thanks

 

[Nozzle]

Optionally grind flat
Acid etch
Rinse
Prime
2k epoxy resin paint, thin just a little if you want it to run. (Take a look at Regal Paints, who have regular discounting - no affliation)

Any other type will just peel off with the action of your tyre

 

[dhutch]

Certainly for a professional job Epoxy appears to be king, but there is a bit or work in getting it right and its not cheap.

Have a read of this: https://www.pistonheads.com/gassing/topic.asp?h=0&f=&t=1730030



Daniel

 

[GKH]

Thank you both for the feedback. I will do some more reading on the options you've mentioned.