Hi all.
Hope you can offer me some help. Details: (please forgive my ignorance; some of the terms I use may not be correct and my need clarification)
Boiler: Baxi Bermuda 551 (it sits behind a gas fire -back boiler !?)
System: My Heating system is pretty standard, with the boiler downstairs and the HW storage tank in an airing cupboard upstairs. Thermostat on the wall in the Hall and the clock programmer (analog not digital) upstairs in the airing cupboard.
The problem: I cannot seperate the function of HW only and CH.
There is a switch on the 'programmer' set to HW Only yet the heating still comes on. I have tried different combinations with the switch but cannot get only HW.
This has been happening for a few weeks now; there have been no major changes to the system for months.
I was thinking along the lines of replacing the programmer for a digital one to see if that made any difference ! ...I am good at DIY so changing the programmer "shouldn't" cause me too much grief...but I leave plumbing and CH stuff to the experts.
Thanks in advance.
Scott.
_____________________
moderator
please note 5 your title has been edited
Hope you can offer me some help. Details: (please forgive my ignorance; some of the terms I use may not be correct and my need clarification)
Boiler: Baxi Bermuda 551 (it sits behind a gas fire -back boiler !?)
System: My Heating system is pretty standard, with the boiler downstairs and the HW storage tank in an airing cupboard upstairs. Thermostat on the wall in the Hall and the clock programmer (analog not digital) upstairs in the airing cupboard.
The problem: I cannot seperate the function of HW only and CH.
There is a switch on the 'programmer' set to HW Only yet the heating still comes on. I have tried different combinations with the switch but cannot get only HW.
This has been happening for a few weeks now; there have been no major changes to the system for months.
I was thinking along the lines of replacing the programmer for a digital one to see if that made any difference ! ...I am good at DIY so changing the programmer "shouldn't" cause me too much grief...but I leave plumbing and CH stuff to the experts.
Thanks in advance.
Scott.
_____________________
moderator
please note 5 your title has been edited