Ideal Isar 30 HE PCB replacment

[Dangaz]

Hi, have a problem with replacing a PCB on a Ideal Isar 30 HE, the new board is orange , not the usual black and there is no connection for the ignition lead, Is this an upgraded PCB or the wrong one for the boiler, any ideas

Thanks in advance

 

[shambolic]

You have the wrong one you have the HE version 174486. You need the original M series version 174290.
Return it and get money back unless you got it from unreliable eBay source as I've seen some out there advertising pcbs that do all models when they clearly don't.
Sorry hope this helps though

 

[Dangaz]

Many Thanks , it going back , got it from plumb centre

 

[kevindgas]

but Op it will probably be orange most of the new ones are

 

[idealnumber1]

not if its the old m-series they are black 174290 as shambolic said

 

[shambolic]

but Op it will probably be orange most of the new ones are

Nope old M series board is still black and has spark generator on the board as opposed to a separate generator on flue manifold!
Thats why he has nowhere to plug the spark lead into on his new board

I wish I new who you were idealnumber1 (are you in Hull)???

 

[idealnumber1]

no

 

[Deleted member 105431]

pcb's are usually non returnable-could be an expensive error!