Does this boiler have 1 pcb or pcb and ignition pcb. I'm looking tomorrow, customer has said that the boiler casing blew off and gas has been cut off and made safe. The Manuel shows just 1 pcb but my supplier reckons it has ignition pcb as well. Thanks for any advice.
Ideal mini c24
- Thread starter rosiew
- Start date
Sponsored Links
You should be posting these questions in the CC !
It all depends on the date it was made.
Most had two Pcbs and last ones could have any of three different single PCBs. None of these were reliable and the boiler had to have been made for the particular 1+2 or for the 3 of the PCBs.
Some are difficult to set up as well.
Ask further in the CC
It all depends on the date it was made.
Most had two Pcbs and last ones could have any of three different single PCBs. None of these were reliable and the boiler had to have been made for the particular 1+2 or for the 3 of the PCBs.
Some are difficult to set up as well.
Ask further in the CC
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
