Identifying when a Galaxy G2 is set?
- Thread starter twixx
- Start date
don't think you can display if system is set on the galaxy, but the easy way is program an output to set and connect a LED to the output.
Mine is set the way Europlex says. Maybe yours displays the same banner whether set or not. If so then...
Menu 51, option 12, banner.
This parameter has three settings:
1 - Top Line
2 - Bottom Line
3 - Show on Set. 0=Off (blank display when set), 1=On (Display normal banner when set)
Menu 51, option 12, banner.
This parameter has three settings:
1 - Top Line
2 - Bottom Line
3 - Show on Set. 0=Off (blank display when set), 1=On (Display normal banner when set)
Make sure that you can't see the keypad from outside or Billy Burglar will know whether your alarm is set or not!!
It's a Grade 2 requirement NOT to show the alarm status, even if you can't see it from outside...
It's a Grade 2 requirement NOT to show the alarm status, even if you can't see it from outside...
I figured that something along those lines would be in place, that's fine...
Thanks for your replies folks... I like the idea of LED indication but not idea where I could put one without Billy being able to spy it
What if you're already in the house and live in a PIR'less place?
Sorry, I'm obviously having a bad day, it has been a long day at work. Could you please explain what you mean.
It's to be hoped, the the same state you set it to.
That would be too easy.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local