indesit ariston error codes

Joined
30 Apr 2008
Messages
6,137
Reaction score
1,044
Country
United Kingdom
Indesit WIDL Codes

See also Hotpoint WF & some WD, left hand lights from top to bottom or digital display.(next page)

widl codes - light flashing from left to right are numbers 1-4

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

f1 and f17 share the same light

.
 
Sponsored Links
Hi Rocks,

I have an older machine, Indesit wi101, which does not have all the lights and no Fxx read out.

It has a control knob which now clicks round and a single led light which flashes - this indicates the problem - mine flashes once and pauses for about 10 seconds then flashes once again ....

Wondered if you had the error code for the flashing light?

Pete
 
its the same as the codes but no light ,refit the connections on pcb make sure they are tight if not pcb is shot
 
so i have looked at your list of error codes, and as my ariston led flashing are 1 and 4.
going by your info ii think mine may be the eprom/set up error?

can you advise what this means please

regards
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top