hotpoint washing / dryer machine error codes wf/ wd models

30 Apr 2008
Reaction score
United Kingdom
Error Codes

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

So in this instance with the second light flashing the error code would be f04 light 2. pressure sw stuck on empty
Sponsored Links
Thanks Rocks1, thats really handy, don't suppose you have the same thing for Zannussi machines do you?
Hope its OK to add to an old thread

Can anyone list the error codes for the Hotpoint Aquarius WF101 washing machine (not with dryer) please. I have lights 1, 2 , 3 and 4 flashing rapidly. Also final rinse and on/off flashing.
Sponsored Links
Thats a pcb fault , check the c17 cap is ok otherwise pcb needs replacing.
Can you advise on an issue with the WF101?
Power to main board but no lights, nothing.

Is there power to the top board. Check bottom pcb for burn marks.
Any ideas would be greatful the top light on the right "6" is flashing and machine seems to be filling and emptying at the same time ?
The machine is a hotpoint wml730

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Sponsored Links