hotpoint washing / dryer machine error codes wf/ wd models

[rocks1]

Error Codes

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

So in this instance with the second light flashing the error code would be f04 light 2. pressure sw stuck on empty

 

[jj4091]

Thanks Rocks1, thats really handy, don't suppose you have the same thing for Zannussi machines do you?

 

[rocks1]

done as requested

 

[HappyGirl]

Hope its OK to add to an old thread

Can anyone list the error codes for the Hotpoint Aquarius WF101 washing machine (not with dryer) please. I have lights 1, 2 , 3 and 4 flashing rapidly. Also final rinse and on/off flashing.
thanks

 

[rocks1]

Thats a pcb fault , check the c17 cap is ok otherwise pcb needs replacing.

 

[oceanwasp]

Can you advise on an issue with the WF101?
Power to main board but no lights, nothing.

Thanks.

 

[rocks1]

Is there power to the top board. Check bottom pcb for burn marks.

 

[mrandmrsshute]

Any ideas would be greatful the top light on the right "6" is flashing and machine seems to be filling and emptying at the same time ?
The machine is a hotpoint wml730