The belt on my machine kept slipping off when the cycle went into spin mode. I took the belt to my local dealer who explained that there was nothing wrong with it. He suggested that i tried spinning the drum, and if there was any rattling noises, then the bearing may have gone. I tried this but the drum spun perfect, with no noises.
I went to another dealer and bought a new belt and yip, it made no difference, the new belt would fall off during spin mode (yes I know I should have listened in the first place ).
Any suggestions please, this is driving me crazy.
Technophobic woman................
Jackie
++++++++++++++++++++++++++
Wow, after reading replies to other msgs regarding spinning, I thought I'd check the pump, concrete blocks etc. As I was doing this I discovered a metal plate conecting the motor to the shock absorbers (sorry not sure what the term is for these) had snapped !!!!!!!!!! Hopefully this is what has been causing the problem and its not another problem I've created whilst willing my machine to spin.
Does anyone have any idea what this part is called or where I'm likely to purchase it from etc.
Cheers
Jackie
I went to another dealer and bought a new belt and yip, it made no difference, the new belt would fall off during spin mode (yes I know I should have listened in the first place ).
Any suggestions please, this is driving me crazy.
Technophobic woman................
Jackie
++++++++++++++++++++++++++
Wow, after reading replies to other msgs regarding spinning, I thought I'd check the pump, concrete blocks etc. As I was doing this I discovered a metal plate conecting the motor to the shock absorbers (sorry not sure what the term is for these) had snapped !!!!!!!!!! Hopefully this is what has been causing the problem and its not another problem I've created whilst willing my machine to spin.
Does anyone have any idea what this part is called or where I'm likely to purchase it from etc.
Cheers
Jackie