Indesit W93 Dial turning and LED flashing

[fabgav]

Hi all,m have search for error code spesific to this on the forums but cant find it so i'll post it,

Dial is turning non-stop and led flashes 3 times.

Anyone know what code this is for?

many thanks
Gav

 

[rocks1]

f03 is the error code ,ntc detatched or could be pcb fault ,ntc is in the heater little black thing 2 very thin wires on it ,you can push connections on pcb that might do it

 

[fabgav]

cant see little black thing with two thin wires anywhere or anything that seems to be discontected, anymore advice??

thanks

 

[rocks1]

at the back of mc remove rear panel ,down at the bottom at 6 oclock is a heater 3 wires attached look at middle one the 2 thin ones in the middle are they attacted .also while your there pcb on the left refit the connections on pcb

 

[fabgav]

think i found it but either way there are definately no wires or connectors disconected anywhere.

Could it be the pcd dead then or the ntc (what is that by the way?)

 

[rocks1]

ntc is attached to the heater at the bottom of the drum you should see a 8 mm nut in the middle ,thats the ntc . also push all connections on the pcb to the left of the drum in the corner

 

[fabgav]

Def no good, all connected. still no good, think its going to the scrappers
thanks alot for your help matey